This section talks about using LCDproc with the serial LCD displays of the CFA632 and CFA634 series by CrystalFontz, Inc.
DEVICE
Select the serial output device to use.
If not given, default is /dev/lcd
.
WIDTH
x
HEIGHT
Set the LCD's dimensions in terms of characters per line and lines.
If not given, it defaults to 20x4
.
CONTRAST
Set the initial contrast.
Legal values for CONTRAST
are in the range
between 0
and 1000
.
If not given, it defaults to 140
.
BRIGHTNESS
Set the initial brightness.
Legal values for BRIGHTNESS
range from
0
to 1000
.
If not given, it defaults to 1000
.
BRIGHTNESS
Set the initial off-brightness.
This value is used when the display is normally
switched off in case LCDd is inactive.
Legal values BRIGHTNESS
are in the range
from 0
to 1000
.
The default is 0
.
1200
|
2400
|
9600
|
19200
|
115200
}
Set the the baud rate to use when communicating with the LCD.
It defaults to 9600
if not specified.
yes
|
no
}
Set the firmware version (New means >= 2.0) [default: no
; legal: yes
, no
]
yes
|
no
}
Reinitialize the LCD's BIOS [default: no
; legal: yes
, no
]
normally you shouldn't need this